Fence installation
New fence design and installation for residential and commercial properties. Professional setup from layout to finished posts and panels.
Learn moreService
Installation and repair of automatic gates for driveway and commercial access. Openers, safety sensors, and controls for reliable operation.
Chattanooga Fence Builders handles automatic gate installation and repair in Chattanooga, TN for homeowners and businesses who need a driveway or access gate that opens every time. We install new automatic gates, fix openers that stall or stop, and sort out safety sensors and controls that quit working. You get a clear explanation of what the job involves, what drives the cost, and whether a repair or a replacement makes more sense, all before any work starts.
Automatic gates fail in a handful of predictable ways, and new installs come down to a few key decisions. Here is the work we take on:
If your gate is manual and you want it fixed rather than automated, our gate repair work covers that too. Fences and gates are the whole of our work, so the gate, the posts, and the fence line all get handled by the same crew.
You describe the problem or the project: a gate that will not open, a sensor that keeps tripping, or a new electric gate for your driveway. For installs, we talk through the opening width, the slope, and how you want to control access.
For repairs, we test the opener, check power, inspect the sensors, and look at the gate hardware and posts. Many "opener problems" are actually a sagging gate or a shifted post making the motor work too hard. For installs, we measure the opening, check the grade, and look at where power will come from.
Before any work starts, we explain what failed or what the install involves, what it will cost, and whether a repair makes more sense than a replacement. No surprises mid-job.
Repairs often wrap up in one visit when the part is on hand. Installs take longer: setting posts deep enough for clay-heavy soil, hanging the gate, mounting the opener, wiring the sensors, and programming remotes and keypads.
Before we leave, the gate opens, closes, and reverses on obstruction the way it should. We show you how the controls work and what to watch for.
No two gate jobs cost the same, but the factors are consistent:
We will not guess at a number over the phone and then change it on site. Request a free estimate and we will look at your gate and give you a concrete quote for the work it actually needs.
Chattanooga Fence Builders installs and repairs fences and gates for homeowners and businesses across the Chattanooga area. That is all we do, so an automatic gate is not a side job for us. The gate, the opener, the posts, and the fence it connects to are one system, and we treat them that way.
We build for this region. Chattanooga's clay-heavy soil and freeze-thaw winters shift posts and footings, and a shifted post is one of the most common reasons an automatic gate starts dragging or binding. We set footings for those conditions so the opener is not fighting the gate a year from now.
We also serve the nearby communities, including Hixson, East Ridge, East Brainerd, Red Bank, Soddy-Daisy, Signal Mountain, Ooltewah, Collegedale, Harrison, Middle Valley, Cleveland, Fort Oglethorpe, Ringgold, Fairview, LaFayette, and Dalton. Wherever the gate is, you get the same approach: a straight answer on what the job involves and what it costs before work starts.
A gate that opens but refuses to close usually has a safety sensor problem. Photo eyes that are blocked, misaligned, or failed tell the opener something is in the way, so it holds the gate open by design. Cleaning or realigning the sensors fixes many of these; a failed sensor gets replaced.
Repair it when the fix is a single part on an otherwise sound unit, like a board, a remote receiver, or a sensor. Replace it when the motor is failing, parts are hard to find, or the opener is undersized for the gate's weight. We tell you which situation you are in before you spend anything.
Often, yes. If the gate is square, the hinges are sound, and the posts are solid, we can add an opener, sensors, and controls to a manual gate. If the gate sags or the posts have shifted, we fix that first, because an opener cannot overcome a binding gate for long.
Swing gates suit level driveways with room for the gate to travel. Sliding gates work better on slopes, short driveways, or openings where a swinging panel would hit parked cars or a grade change. We look at your driveway and recommend the one that fits.
Yes. We install and repair automatic gates for business lots, including sliding gates, swing gates, openers, and access controls like keypads and loop detectors. Commercial gate work pairs with our commercial fence installation when the whole perimeter needs attention.
Most repairs finish in a single visit when the part is available. New installs depend on the site: setting posts, letting footings cure, mounting the opener, running power, and programming controls. We give you a realistic timeline with your quote, based on your gate and your site.
If your gate is stuck, sagging, or you are ready to add an electric gate to your driveway, reach out and tell us what is going on. We will look at the job, explain your options in plain terms, and give you a free estimate before any work starts. A gate problem rarely fixes itself, so call us or request a quote and get it handled.
Prefer to talk it through? Call (423) 615-8548 — a quick call is usually the fastest way to get a straight answer for your situation.
Where we work
Need automatic gate installation and repair? We're ready to help.
Quality fences for homes and businesses. Call Chattanooga Fence Builders for a free estimate and clear pricing.
Related
New fence design and installation for residential and commercial properties. Professional setup from layout to finished posts and panels.
Learn moreWood fence installation for privacy, property lines, and curb appeal. Pressure-treated and cedar options for durability and style.
Learn moreRepair of damaged, leaning, or rotting fence sections. We fix posts, replace boards, reinforce gates, and restore function and appearance.
Learn moreGate repair and adjustment for residential and commercial gates. Fix sagging hinges, latches, and frames to restore smooth operation.
Learn moreDurable fencing for commercial property, industrial sites and multi-unit buildings in chain link, vinyl or wood, built to the site plan.
Learn moreComplete fence removal and new installation. We demolish old fencing, haul away debris, and build a new fence to your specifications.
Learn moreGalvanized and vinyl-coated chain link fencing for yards, kennels, and commercial use. Affordable, durable, and secure with minimal maintenance.
Learn moreLow-maintenance vinyl fence installation for privacy, property lines, and aesthetics. No painting or staining; clean appearance lasts for years.
Learn moreSolid privacy fencing for residential yards — wood, vinyl, or composite materials. Blocks sight lines and sound for a secure, private outdoor space.
Learn more